Copy
Automatic cutlisting, texturing, feature recognition, and layered DXF export. A link between SolidWorks and your CNC machines.
PathFinder3D

Pathfinder3D Pro v0.8.06

June 6th, 2013

We are pleased to announce the release of our latest version, Pathfinder3D v0.8.06. 

Pathfinder3D v0.8.06 adds the ability to automate back side cuts. This means that when a part has features on 2 sides, Pathfinder will Automatically flip the part over and create a dxf file for the back side of the part. Previously this had to be done manually. 

Follow this link for a demonstration of this new feature. If you would like a free 30 day trail of Pathfinder, just reply to this email. We will send a download link to you. We can also help you with the initial setup, and help integrate Pathfinder with your CAM system. If you are modeling in SolidWorks and need to export to a CNC, Pathfinder will save you a huge amount of time. 

 “I can't tell you how lucky I have been the last few months. If it was not for the SolidWorks-Pathfinder link to AlphaCAM, I would never have been able to take on the workload that we currently have” said Chris Stoner, Owner of  Renningers Cabinetree
 
About SolidWorks
Powered by the Dassault Systèmes 3DExperience Platform, SolidWorks 3D applications help millions of engineers and designers succeed through innovation. Our products deliver an intuitive experience in product design, simulation, publishing, data management, and environmental impact assessment. For the latest news, information, or an online demonstration, visit our Web site (www.solidworks.com) or call 1-800-693-9000 (outside of North America, call +1-781-810-5011).
 
SolidWorks is a registered trademark of Dassault Systèmes SolidWorks Corporation in the US and other countries. Other brand and product names are trademarks of their respective owners.



Copyright © 2013 PathFinder3D, All rights reserved.
Email Marketing Powered by Mailchimp